Chameleon Paint

Manufacture of Industrial, Protective, Marine Traffic, Automotive & Decorative Paints

364 247 92-4
Red-Papers
Product Group :Industrial Paint
Aluminum Alkyd Paint
Alkyd aluminum paint is a one component coating. Color fastness, proper hardness and adhesion are some of ...

Alkyd aluminum paint is a one component coating. Color fastness, proper hardness and adhesion are some of the main properties of this product. This paint is an anti- corrosion and electrical conductor paint. Its heat resistance (up to. 1200c) and it is very suitable for outing of radiators, warm condition. Gas sending steel structures and chimneys. This product is not suitable for immersion and should not be used in alkaline condition.

Social Sharing

Share on facebook
Share on twitter
Share on linkedin
Share on email
Share on telegram
Share on whatsapp
Chameleon

• The surface should be free form any rust, moisture, mill scale, oil & grease

• Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life

• For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting.

• Apply the paint immediately followed surface preparation

Chameleon

• Flush equipment with recommended cleaner before use – Stir paint with a Power Mixer.

• Use Shakiba’s thinner for adjusting the viscosity.

• The thinner should be added gradually.

• The consumption depends on temperature & type of equipment & thickness paint

• Clean all equipment with Shakiba’s thinner.

Chameleon

• This product is flammable it must be kept away from heat, flash & flame

• keep container closed use with adequate ventilation & Earth

• Prolonged & repeated contact with skin may be harmful

• In case of eye contact flush with plenty of water and check with a medical doctor.

Chameleon

• Drying time is dependent on air and steel temperature, applied film thickness.

• Never apply coatings under environmental condition.

• Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under.

• This information given 25°C temperature and changed temperature cause to change data.

• Don’t use different thinner; otherwise we decline all responsibilities of it.

• For more information, please call to sale engineering expert.

Product Quality Grade
5/5
Industrial Paint

For more information about this product, you can download the related PDF file from the link below.